300M WiFi Repeater with 4 External Antennas LGX-D10
Suitable for entry-level WiFi extension programs, retail-ready supply, and OEM / ODM discussion.
Product Images & Details
Technical Specifications
| Item | Specification |
|---|---|
| Product Type | Plug-in Wireless WiFi Repeater |
| Wireless Speed | 300Mbps |
| Antenna Design | 4 External Antennas |
| Working Modes | Repeater Mode, AP Mode |
| Ethernet Ports | Dual RJ45 Ports |
| Installation Type | Wall Plug-in |
| Application Range | Home, apartment, small office, room coverage extension |
| Setup Feature | Quick setup with memory function |
| Wired Use | Supports wired access for desktop or laptop connection |
| Recommended Use | Basic indoor signal extension and dead-zone improvement |
Key Features
Applications - Where This Product Fits Best
This model is designed for basic indoor signal extension projects where simple installation, practical coverage improvement, and low deployment cost are priorities.
| Scenario | Fit |
|---|---|
| Home WiFi Dead Zones | Extends coverage to bedrooms, living rooms, and corners with weak signal |
| Apartment Rooms | Improves basic wireless reach in compact indoor layouts |
| Small Office Use | Supports simple coverage expansion for workstations and shared rooms |
| Wired + Wireless Access | Useful where both WiFi and basic wired output are needed |
| Entry-Level Distribution Projects | Suitable for price-sensitive channels and standard indoor networking needs |
WiFi Repeater FAQ
These questions cover the most common concerns around indoor deployment, product tier selection, and OEM planning for WiFi repeater programs.
1. Is this model suitable for OEM or distribution projects?
Yes. This model is suitable for entry-level OEM, ODM, and distribution programs that target basic indoor WiFi extension, especially for cost-sensitive markets and standard retail or project channels.
2. Does 300Mbps mean the repeater will always deliver 300Mbps in real use?
No. Actual performance depends on router quality, signal source strength, wall blockage, interference, and installation position. 300Mbps is the rated wireless specification, not a guaranteed real-world throughput figure.
3. What is the main advantage of the 4 external antenna design?
The 4 external antennas help improve signal reception and transmission stability in common indoor layouts, especially where signal needs to pass through walls or cover separated rooms.
4. What is the difference between Repeater Mode and AP Mode?
Repeater Mode extends an existing wireless signal.
AP Mode uses a wired network source and creates a wireless access point for nearby devices.
5. Why do some repeater installations perform poorly?
In many cases, the repeater is placed too close or too far from the main router. Proper midpoint placement between the router and the weak-signal area is important for better extension results.
6. What devices can use the RJ45 ports?
The RJ45 ports can be used for desktop PCs, laptops, TVs, or other basic wired network devices, depending on the installation environment and network setup.
7. Is this model suitable for large commercial coverage projects?
No. This model is better suited for basic indoor residential or small office use. For larger commercial deployments, buyers usually need higher-spec solutions with stronger chipset, higher throughput, and more advanced coverage capability.
8. Is this model easy for channel customers to sell?
Yes. The plug-in structure, simple setup logic, and familiar use case make it suitable for mainstream channel sales, especially in entry-level WiFi extension segments.
OEM / ODM Evidence for WiFi Repeater Projects
For WiFi repeater projects, OEM / ODM capability should be shown through actual customization scope, validation workflow, and project deliverables — not generic factory claims.
Hardware & PCBA Engineering
Built for buyers who need more than a standard public-board solution.
Firmware & Software Support
Suitable for projects that need branded UI, protocol features, or secondary development.
Rapid Tooling & ID Design
Designed for projects that need private mold, modified housing, or faster sample validation.
RF Testing & Quality Control
Used to support more stable wireless performance and lower production risk.
Production Capacity
Suitable for repeat orders, peak-season supply, and distributor-level programs.
Lead Time & Supply Chain
Built for faster rollout when the project uses mature repeater platforms.
Typical OEM / ODM Scope
| OEM / ODM Item | Typical Support | What Buyer Can Confirm |
|---|---|---|
| Logo / branding | Yes | Device logo, label, carton artwork |
| Plug localization | Yes | EU / US / UK / AU plug options |
| Packaging customization | Yes | Gift box, carton mark, manual layout |
| Web UI / app branding | Project-based | UI screenshot or branding sample |
| Firmware feature adjustment | Project-based | Function list confirmation |
| Memory / flash configuration | Project-based | BOM / spec confirmation |
| Certification support | Project-based | Compliance file path by market |
| Sample validation | Yes | Pre-production sample review |
| Pilot run / trial order | Project-based | Trial quantity discussion |
| Mass production release | Yes | QC checkpoints after approval |
Note: OEM / ODM scope for WiFi repeater projects depends on chipset platform, firmware path, compliance requirements, MOQ, and target market. Not every customization item applies equally to every project.
Need a reliable WiFi repeater OEM / ODM partner?
Talk to our team about firmware, housing, interface, and packaging customization.
Factory Support Behind This Product
This product is backed by practical factory support for production, quality control, packaging coordination, and routine workshop management for B2B supply projects.
Certificate
Contact Us
Please fill out the form below, and our professional consultants will assist you as soon as possible, typically within 24 hours.
Contact Information
Phone: +86-13923714138
WhatsApp: +8613923714138
Email: addway.wang@igrentech.cn
Address: Room 301, Building A2, Qiangrong East Industrial Zone, No. 723 Zhoushi Road, Hangcheng Street, Shenzhen, Guangdong, China